Template:File generation description

 

This vector image was created with Inkscape, or with something else.

Template documentation[ view · edit · history · purge ]

This documentation is transcluded from Template:File generation description/doc.

This template allows to specify how a file was made, e.g. the used tool and other properties of an SVG drawing.

It serves as an interface from human readable parameters to the template:{{Image generation}}.
Most parameters of Image generation can be used with more or less self-explaining names.

This inbetween-template allows to use {{Image generation}} with parameter names, instead of the short codes.
The template should be descriptive therefore no abbreviations exist (for template or parameter names).
The most essential tags can be specified, but all the subcategorizing and formatting is provided only by the original.
In general, parameter names are not aliased; they all start with an upper case letter, while the values are in lower case.
Of the first four parameters,

• SVG tool is required and Topic is most recommended,
• W3C error count and Other fields are usefully defaulted.

There are further

• more parameters which are used by specifying their value,
• a set of yes/no (true/false) parameters which default is "no" (false),
• the three parameters to describe a digital alteration
• the parameters to describe possible SVG bugs, and
• parameters to format the possible display of source codes.

Normally very few parameters will be sufficient, and only in special cases some more are needed.
A set of all parameters can be copied from the complete parameter list below.

Usage

{{File generation description |SVG tool= |Topic= }}

Template parameters

Parameter	Description		Default	Status
SVG tool	specify the name of the SVG tool: prepended with "Created with" it gives a template name.		0	required
W3C error count	specify the number of errors, detected by the W3C Validator (see explanation)		0 (valid)	optional
Other fields	specify either "yes" for {{InFi}} insertion, or "no" for a linefeed, or "none" (see explanation)		yes *)	optional
Topic	specify a description what the image shows, e.g. coa, flag, icon, logo, map (see the list below)		empty	suggested
0	0 more parameters:		0	optional
Category	specify to change the categorization		standard	optional
Subcategory	specify to change the subcategorization		standard	optional
Sortkey	specify to change the sorting within the [sub]category		empty	optional
Topic-d	specify a topic for the display only (see Difference between "s" and "w")		Topic	optional
User	specify any textstring for a user (see {{U}} or {{By}})		empty	optional
Userlink	specify a linkable user name (this parameter precedes "User")		empty	optional
More	specify free text to be displayed		.	optional
Prefix	specify anything (text and/or templates) to display previously		empty	optional
Trailer	specify anything (text and/or templates) to display afterwards		empty	optional
Tincture	specify a string e.g. like or/azure/gules (see Tincture); for Tincture-ss= see other shades		empty	optional
Colorbox	specify a string of one or more color codes (see #Colorboxes)		empty	optional
Graphic lab	specify an ISO 639 language code, or Commons or Workshop {see the list below}		empty	optional
Othertool	specify the toolname when "Other tool" name is known		empty	optional
Additional	specify another tool which was used together with the "SVG tool"		empty	optional
Message	specify one or more message boxes		empty	optional
Broken file	specify the description why the file is corrupted		empty	optional
Supersedes	specify the name of the superseded file		empty	optional
Superseded by	specify the name of the superseding file		empty	optional
0	0 yes–no parameters:		0	optional
Superseded	yes when the file is inferior to another one		no	optional
Commonist	yes when the file was Uploaded with Commonist		no	optional
Text embedded	yes (or switch) when the file contains embedded text		no	optional
Text as path	yes when the file contains path text		no	optional
Large file	yes when the SVG file is too large to show the source code		no	optional
Easy border	yes when a border should be drawn		no	optional
PGF data	yes when the file contains PGF CDATA blocks		no	optional
Traced SVG	yes when the file is a poorly traced SVG		no	optional
Bad SVG	yes when the file contains raster data		no	optional
Fake SVG	yes when the file is a Fake SVG		no	optional
Topo SVG	yes when the file contains topographic raster data		no	optional
Required raster	yes when the file contains required raster data		no	optional
SVG 1.2	yes when the file contains SVG 1.2 features		no	optional
Topo SVG	yes when the file Should be text		no	optional
Fictional	yes when the image shows a fictional object, e.g. a flag		no	optional
Simplified SVG	yes (or pair of numbers) when the SVG code had been simplified		no	optional
Textedit only	yes (or only/+/-) when no vector graphic editor should be used (aka No Inkscape)		no	optional
Draw by hand	yes (or name of an example file) when a very simple SVG image should not be drawn with a tool		no	optional
Vector version	yes (or name of the SVG file) when a vector version exists of that raster image		no	optional
Convert to SVG	yes (or topic) when the raster image should be converted to SVG		no	optional
Simple to SVG	yes (or topic) when a very simple bitmap should be converted to SVG		no	optional
Important	yes when the code had been created with Inkscape-Important		no	optional
0	0 Retouched picture parameters:		0	optional
Retouche	specify what has been modified		empty	optional
Modifier	specify the user name of the editor who has done the digital alteration		empty	optional
Original	specify the file name of the original picture, if any		empty	optional
0	0 bug description parameters:		0	optional
General bug 0Gaussian bug 0Compatibility bug 0Demonstration bug 0Former bug 0Overwritten bug 0Replaced bug 0Unsolved bug 0FlowRoot bug	specify descriptional text of one or more bugs		empty empty empty empty empty empty empty empty empty	optional
Technically replaced	specify the name of the replacing file		empty	optional
0	0 display source code parameters: see Created with code00Three source codes can be displayed: 0 Each one of the following parameters can be postfixed with either 1, 2 or 3; the first set can also be used without the postfix "1".		0	optional
Code	copy the source code which was used to generate the image		0	optional
Syntax	specify one of the supported languages for highlighting		0	optional
Titling	specify the titling headline to be shown above the code		0	optional
Collapse	specify the headline to be shown instead of the code		0	optional
Diffusion	specify a category diffusion to categorize "Images with Diffusion source code"		0	optional
Explanation	specify an explanatory text to be shown above the code		0	optional
Footnote	specify a footing note below of the displayed code		0	optional
Format	specify a style attribute for code display		0	optional

Additional information

The template is intended to be used in the following namespaces: the File namespace

The template is intended to be used by the following user groups: all users

Localization

This template is not intended to be localized.

The template itself does not generate any localizable text, except an error message.

Explanation

This inbetween-template allows to use the template:Image generation with parameter names, instead of the short codes.
The most essential tags can be specified, with abstention of all the tag-subcategorizing and tag-formatting that is provided only by the original.
In general, parameter names are not aliased; they all start with an upper case letter, while most parameter values are in lower case.
Of the first four parameters, the tool name and the topic are required, while error count and other fields are usefully defaulted. There are

• more parameters which are used by specifying their value,
• a set of yes/no (true/false) parameters which default is "no" (false),
• the three parameters to describe a digital alteration
• the parameters to describe possible SVG bugs, and
• parameters to format the possible display of source codes.

SVG tool

Regardless of the parameter name it can also be another tool which does not, or not only, create SVG files; parameter Tool name may be used in that case.
This parameter is required and will not be defaulted. An error message occurs when this parameter is missing, or when no such template exists.
The parameter value is case sensitive. All the template names can be used, e.g.

• Adobe Illustrator
• BKchem
• ChemDraw
• ChemSketch
• Chemtool
• CorelDRAW
• Fig2SVG
• Gnuplot
• HandSVG
• Inkscape-hand
• Inkscape
• LibreOffice
• Other tool
• Sodipodi
• Unknown tool

(more than 100 "Created with ..." templates)

• IA 0when Inkscape and Adobe Illustrator are used (no matter which sequence)

W3C error count

The parameter not specified, or with 0 or v, means no W3C-error or "valid" A value greater than 0 means "invalid because of .. errors". Other values:

• For files that are not W3C-checkable, specify -1.
• n can be set for non-SVG files (not necessary, will be set automatically)
• s is used for SVG files that are not checked, or should not show their validation

Other fields

The parameter not specified, or with yes, includes the {{InFi}} treatment to create the field name. Specified with no it performs a {{Clr}}.

Take care: Not specified is treated differently from an empty definition !

An empty specification "Other fields=" does nothing, like the specification "Other fields=none".

• recommended: when used with "other fields" of {{Information}}, do not specify it, or with "yes"
• deprecated: when used outside of {{Information}}, or within {{Infor}}, specify it with "no" (or with "none")

Topics

This parameter should always be provided with a value, it is essential for display and for the subcategorizing.
The most frequent used "topics" can be specified by the following parameter values, all as written in singular with lower caps.
But as well all values as defined in the tables can be specified with their short codes.

• arrow
• button
• chart
• coa | coat of arms
• diagram
• digit
• drawing
• emblem
• equation
• flag
• geometric
• icon
• logo
• map
• notation
• order
• pictogram
• roundel
• seal
• signature
• sign
• structural formula
• text logo | textlogo
• trigonometry
• unicode
• world map
• symbol

Some templates default a not specified topic, e.g. BKchem, ChemDraw, ChemSketch, Chemtool, N2S with "structural formula".
To suppress the (standard) definition of any topic, use Topic = none.

More parameters

Cat/Sub/Key

Category, subcategory and sort key are created following certain standards; it is advised not to change it – but nevertheless it can be altered if that is desired.

• Category can be specified complete (e.g. [[Category:Collection of bugs: Part1|Severity]]), or just the category name (e.g. Collection of bugs) with possibility to define the other two parameters (e.g. Subcategory=: Part1, Sort key=Severity).

To suppress the (standard) categorization, use Category = none.

• Subcategory can replace the standard subcategorizing by topic

To suppress the (standard) subcategorization, use Subcategory = none.

• Sorting within the category or subcategory can be changed by the parameter value of "Sort key".

User, Userlink

The parameter value can be either a simple textstring (e.g. User=The Stanford University), or a transclusion with e.g. {{U}}, {{Ut}}, {{Uw}}, {{Uc}}}, {{Ud}}, {{Uwt}}.

The link to a Commons user page can be performed with the other parameter Userlink which uses the template:U, e.g. Userlink=Leyo

Graphic lab

Grahic lab categories contain in general subcategories for CoA, Flag and Map.
Currently the following Graphic labs are established:

• ar
• bn
• de (and "gi" for German individ.)
• en
• es
• fr
• he
• it
• pl
• ru
• tr
• Commons‎
• Workshop

Colorboxes

There are seven different parameter names, to generate different color box layouts:

• Colorbox00 generates boxes with {{Legend}} from parameter pairs
• Colorbox-b generates boxes with {{ColorBox}} from single parameters
• Colorbox-d generates boxes with {{ColorBox}} from parameter pairs
• Colorbox-l generates boxes with {{Legend}} from single parameters ¹)
• Colorbox-m generates boxes with {{Legend-small}} from parameter pairs
• Colorbox-s generates boxes with {{Legend-small}} from single parameters
• Colorbox-t generates boxes with {{Tbc}} from parameter pairs

¹) Colorbox-l exists just for completion – normally a "Legend" without an explaining text seems not useful.

The (first) parameter has to be a color code

• a valid hexadecimal color code, e.g. "#FF00FF" or "#080"
• a valid tincture color name, e.g. "cendrée"
• a valid CSS color name, e.g "turquoise"

invalid codes cause unpredictable errors. For Colorbox-l and Colorbox-s each parameter is such a color code.
The second parameter of a pair is descriptive text, e.g. "rouge", it may also contain links or other wiki syntax;
when it is missing (e.g. two consecutive slashes), the first parameter is displayed instead.
The parameters are specified as a slash-separated string, e.g. "#aa1122/Color 1/#ccddee/Color 2/#cc00dd/Color 3/#FF0/yellow"

For (heraldic) Tinctures, see the documentation of that template.

Bad/Fake/​Topic/Requ SVG

An SVG file containing raster graphics in most cases is a Bad SVG; in some special cases it will be a Fake SVG or a Topo SVG/Required raster. Only either one of these four possibilities can occur.

Retouched picture

For the complete description of a digital alteration, all three parameters should pass their values; nevertheless any one of them triggers the tagging of the file with the template.

• Retouche can describe the modifications
• Modifier can describe the editor of the alterations, in general it will be a link to a user name
• Original can describe the original picture that has been modified, in general it will be a link to a file name

Always consider the fact that a mere vectorization is not a digital alteration! These cases should use the template:AutVec in the Author= field.

Other tool

It can be specified that a file has been created using more than one (the "SVG tool" of the first parameter) tool.

Raster graphic tags

Of course, Convert to SVG or Simple to SVG is only useful when specified at a raster graphic. All the topics explained in Convert to SVG/doc/param1 can be used.

Vector version when specified at a raster graphic shows the SVG file with the same name, or with the specified name.

Parameter copy

Small example

{{ File generation description
| SVG tool = ChemDraw
| W3C error count =  
| Topic = structural formula
| Text as path = no
| Text embedded = no }}

In this example, only the first parameter is necessary, the others just specify what would be defaulted anyway.
When "Other fields" is missing it is the same as Other fields=yes which will be the best choice in most cases.

Large parameter list

{{File generation description
|SVG tool=
|W3C error count=
|Topic=

|Category=
|Subcategory=
|Sort key=
|User=
|Userlink=
|More=
|Othertool=
|Additional=
|Graphic lab=
|Tincture=
|Colorbox=
|Broken file=
|Superseded by=
|Supersedes=
|Prefix=
|Trailer=
|Message=

|Superseded=
|Commonist=
|Text embedded=
|Text as path=
|Large file=
|Easy border=
|PGF data=
|Traced SVG=
|Bad SVG=  
|Fake SVG=
|Topo SVG=  
|Required raster=
|Fictional=
|Simplified SVG=
|SVG 1.2=
|Textedit only=
|Draw by hand=
|Vector version=
|Convert to SVG=
|Simple to SVG=

|Retouche=
|Modifier=
|Original=
}}

|Other fields=yes

Bug parameters, Code parameters

|Technically replaced=
|General bug= 
|Gaussian blur bug= 
|Compatibility bug= 
|Demonstration bug= 
|Former bug=
|Overwritten bug= 
|Replaced bug= 
|Unsolved bug= 

|Syntax=
|Titling=
|Collapse=
|Diffusion=
|Explanation=
|Footnote=
|Format=
|Code=

{{ifsandbox|