Category:3DBenchy

Media in category "3DBenchy"

The following 32 files are in this category, out of 32 total.

• 
  15 mm long 3DBenchy printed on a formlabs form2.jpg 3,264 × 1,836; 1.17 MB
  
• 
  3 3D printed 3DBenchy models with different faults.jpg 3,264 × 2,274; 1.61 MB
  
• 
  3D BENCHY.jpg 4,608 × 3,456; 4.66 MB
  
• 
  3D-printed 3DBenchy by Creative Tools.jpg 2,592 × 1,944; 1.58 MB
  
• 
  3DBenchy - The 3D-printable calibration object - 3DBenchy.com v1.JPG 2,592 × 1,944; 1.56 MB
  
• 
  3DBenchy - The 3D-printable calibration object - 3DBenchy.com v10.png 1,200 × 1,200; 2.27 MB
  
• 
  3DBenchy - The 3D-printable calibration object - 3DBenchy.com v11.png 1,200 × 1,200; 1.82 MB
  
• 
  3DBenchy - The 3D-printable calibration object - 3DBenchy.com v12.png 1,200 × 1,200; 6.89 MB
  
• 
  3DBenchy - The 3D-printable calibration object - 3DBenchy.com v13.png 1,200 × 1,200; 1.79 MB
  
• 
  3DBenchy - The 3D-printable calibration object - 3DBenchy.com v14.png 1,200 × 1,200; 1.43 MB
  
• 
  3DBenchy - The 3D-printable calibration object - 3DBenchy.com v15.png 1,200 × 1,200; 1.48 MB
  
• 
  3DBenchy - The 3D-printable calibration object - 3DBenchy.com v16.png 1,200 × 1,200; 1,015 KB
  
• 
  3DBenchy - The 3D-printable calibration object - 3DBenchy.com v17.png 1,200 × 1,200; 1.02 MB
  
• 
  3DBenchy - The 3D-printable calibration object - 3DBenchy.com v18.png 1,200 × 1,200; 975 KB
  
• 
  3DBenchy - The 3D-printable calibration object - 3DBenchy.com v2.png 1,200 × 1,200; 1.33 MB
  
• 
  3DBenchy - The 3D-printable calibration object - 3DBenchy.com v3.png 1,200 × 1,200; 1.26 MB
  
• 
  3DBenchy - The 3D-printable calibration object - 3DBenchy.com v4.png 1,200 × 1,200; 1.56 MB
  
• 
  3DBenchy - The 3D-printable calibration object - 3DBenchy.com v5.png 1,200 × 1,200; 2.04 MB
  
• 
  3DBenchy - The 3D-printable calibration object - 3DBenchy.com v6.png 1,200 × 1,200; 1.71 MB
  
• 
  3DBenchy - The 3D-printable calibration object - 3DBenchy.com v7.png 1,200 × 1,200; 1.78 MB
  
• 
  3DBenchy - The 3D-printable calibration object - 3DBenchy.com v8.png 1,200 × 1,200; 2.08 MB
  
• 
  3DBenchy - The 3D-printable calibration object - 3DBenchy.com v9.png 1,200 × 1,200; 4.9 MB
  
• 
  3DBenchy created using color mixing on an FDM printer.jpg 800 × 601; 134 KB
  
• 
  3DBenchy is a 3D model specifically designed for testing and benchmarking 3D printers.stl 5,120 × 2,880; 10.74 MB
  
• 
  3DBenchy measured with tiny caliper.jpg 1,080 × 1,080; 122 KB
  
• 
  3DBenchy printed on a resin printer.jpg 3,264 × 2,448; 326 KB
  
• 
  3DBenchy.JPG 4,320 × 3,240; 2.98 MB
  
• 
  3DBenchy.png 1,200 × 1,200; 938 KB
  
• 
  3DP Biggest Large Benchy.jpg 551 × 428; 87 KB
  
• 
  A two colour 3DBenchy, Side view.png 1,200 × 1,200; 711 KB
  
• 
  Large 3DBenchy.jpg 3,984 × 2,988; 935 KB
  
• Printing Benchys with Hangprinter v4.webm 58 s, 640 × 360; 4.07 MB