File:3D-printed rocket fin can.jpg
Jump to navigation
Jump to search
Size of this preview: 712 × 600 pixels. Other resolutions: 285 × 240 pixels | 570 × 480 pixels | 912 × 768 pixels | 1,215 × 1,024 pixels | 2,431 × 2,048 pixels | 3,589 × 3,024 pixels.
Original file (3,589 × 3,024 pixels, file size: 2.96 MB, MIME type: image/jpeg)
Captions
Captions
My 4" Diameter Airframe 3D-Printed Fin Can
Summary[edit]
| Description |
English: My 4" Diameter Airframe 3D-Printed Fin Can: Fresh off a 20-hour print. Each off the holes has a pop-out support structure for the print. My design fills the full print volume of the Makerbot. |
| Date | |
| Source | https://www.flickr.com/photos/jurvetson/51682321208/ |
| Author | Steve Jurvetson |
Licensing[edit]
This file is licensed under the Creative Commons Attribution 2.0 Generic license.
- You are free:
- to share – to copy, distribute and transmit the work
- to remix – to adapt the work
- Under the following conditions:
- attribution – You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
|
This image was originally posted to Flickr by jurvetson at https://flickr.com/photos/44124348109@N01/51682321208. It was reviewed on 16 November 2021 by FlickreviewR 2 and was confirmed to be licensed under the terms of the cc-by-2.0. |
File history
Click on a date/time to view the file as it appeared at that time.
| Date/Time | Thumbnail | Dimensions | User | Comment | |
|---|---|---|---|---|---|
| current | 02:43, 16 November 2021 | | 3,589 × 3,024 (2.96 MB) | Sv1xv (talk | contribs) | Uploaded a work by Steve Jurvetson from https://www.flickr.com/photos/jurvetson/51682321208/ with UploadWizard |
You cannot overwrite this file.
File usage on Commons
The following page uses this file:
