File:Boring Spool Hole.jpg
Jump to navigation
Jump to search
Size of this preview: 800 × 600 pixels. Other resolutions: 320 × 240 pixels | 640 × 480 pixels | 1,024 × 768 pixels | 1,280 × 960 pixels | 2,560 × 1,920 pixels | 3,648 × 2,736 pixels.
Original file (3,648 × 2,736 pixels, file size: 4.65 MB, MIME type: image/jpeg)
Captions
Captions
Add a one-line explanation of what this file represents
Summary[edit]
| Description |
English: A couple of the wire spools I bought had central holes that were slightly too small to fit on the Agaphone hub. So I bored them out on the lathe.
I ran the lathe at the slowest non-backgeared speed, with the spool turning in the direction to wind up the wire and then took very light cuts. I only had to remove a couple of thou and they fitted perfectly. |
| Date | |
| Source | https://www.flickr.com/photos/43851301@N02/43452316094/ |
| Author | tony_duell |
Licensing[edit]
This file is licensed under the Creative Commons Attribution 2.0 Generic license.
- You are free:
- to share – to copy, distribute and transmit the work
- to remix – to adapt the work
- Under the following conditions:
- attribution – You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
|
This image was originally posted to Flickr by tony_duell at https://flickr.com/photos/43851301@N02/43452316094 (archive). It was reviewed on 4 February 2020 by FlickreviewR 2 and was confirmed to be licensed under the terms of the cc-by-2.0. |
File history
Click on a date/time to view the file as it appeared at that time.
| Date/Time | Thumbnail | Dimensions | User | Comment | |
|---|---|---|---|---|---|
| current | 02:13, 4 February 2020 | | 3,648 × 2,736 (4.65 MB) | Ser Amantio di Nicolao (talk | contribs) | User created page with UploadWizard |
You cannot overwrite this file.
File usage on Commons
There are no pages that use this file.
